![2020 EGGY MAL</br>[7'2 x 22"] </br>Laser Cut Wooden Surfboard Kit 1](https://www.diysurfboardkits.com.au/wp-content/uploads/2020/08/product-tile.jpg "product-tile")
![2020 EGGY MAL</br>[7'2 x 22"] </br>Laser Cut Wooden Surfboard Kit 3](https://www.diysurfboardkits.com.au/wp-content/uploads/2020/08/72-transp.png "7'2-transp")
![2020 EGGY MAL</br>[7'2 x 22"] </br>Laser Cut Wooden Surfboard Kit 4](https://www.diysurfboardkits.com.au/wp-content/uploads/2020/02/DSC00003.jpg "DSC00003")
![2020 EGGY MAL</br>[7'2 x 22"] </br>Laser Cut Wooden Surfboard Kit 5](https://www.diysurfboardkits.com.au/wp-content/uploads/2020/08/72-book.jpg)
2020 Release
What’s Included
Our DIY kits are available in two configurations with a number of optional add-ons allowing you to tailor the kit to what you need.
#1 Just The Frame
This option is for those who will be supplying thier own timber for the deckskins and rails and just want the Laser Cut Frame.
Included with this kit is
- laser cut paulownia frame kit
- laser cut rail guide to assist in shaping
- 1:1 paper template of deck outline
- leash plug
- vent plug
#2 Fully Decked
This option includes all the wooden components required to build your wooden board, all you need to supply is the tools, glue and fibreglassing
Included with this kit is
- laser cut frame kit
- laser cut rail guide to assist in shaping
- 1:1 paper template of deck outline
- paulownia deck skin pack (300x6mm boards)
- paulownia rail pack
- leash plug black
- vent plug black
- access to online build guide
(optional) Add-Ons
These add-ons help during the construction of the board.
- Rocker Table (recommended)
Used to ensure perfect deck skin glue-ups every time by precisely holding the bottom skin in the correct position & matching any concave or ‘V’ of the chosen board while you glue the frame in place. - Fin Plugs
For those who want to use a removable fin set-up instead of a glass on fin setup.
Reviews
There are no reviews yet.